The EXM1A is designed for working with multipurpose hobby or small micro controller project that helps you build your circuit prototype easier with soldering pad. (or working area) This board also has built-in essential circuit that is usually used for your projects such as voltage regulator, and two channel of RS-232C line driver.

Package Contents

• EXM1A Board
• Manual
• 3 Month Factory Warranty

This module is an expansion module for interfacing with microcontroller system. Its outputs are a load controller for both AC and DC with maximum 10 Ampere. There are standard 6-pin connecting interface and IDC-10 which can be connected with other microcontrollers. Equipped with bit jumper for output selection.

Package Contents

• EXP4R24V Board
• Manual
• 3 Month Factory Warranty

This board is an interface module for microcontroller. There are four channels of digital input and four channels of relay output. The digital input circuit is installed an opto-isolator in order to protect the MCU from misusing an external signal. Acceptable voltage range for this module is between 12 and 24 VDC. For the output part, there is a SPDT relay at 5A/220VAC.

Package Contents

• EXP8IO24 Board
• Manual
• 3 Month Factory Warranty

This module is a testing tool for microcontroller system. This module supports both analog and digital signal such as digital input, digital output, pulse signal, debounce signal, piezo speaker and analog voltage reference etc. It’s convenient to use and connect to other microcontroller boards with IDC-10 connector.

Package Contents

• IOTESTER Board
• Manual
• 3 Month Factory Warranty

This module is for converting USB to Serial (TTL) signal. FT232RL chip is integrated on the board to proide much functionality - generated clock circuit and EEPROM. Signal link is designed in DIP-28 pins (600 mil) for ease of use. This converter provides two way serial communications signal conversion betweenthe TTL (Transistor Transistor Logic) output to and from a personal computer USB port using virtual serial COM port. It can be used on any Micro controller - PIC, Atmel or other which has TTL serial communications.

Package Contents

• USBFT232 Board
• USB Cable
• CD Software
• Manual
• 3 Month Factory Warranty

The Pro-PSoC V2.0 is a programming tool for PSoC microcontroller. The device supports programming on the following PSoC family CY8C21XXX, CY8C22XXX, CY8C24XXX, CY8C27XXX and CY8C29XXX. Programming method on the MCU chip via ICP-Port (In-Circuit Programming port) for internal programming.

Package Contents

• Pro PSoC V.2.0 Board
• M-IDC10-1
• RS-232 Cable
• Manual
• CD Software
• WPP-20

This is a mini PSoC microcontroller board from Cypress built-in powerful functions for both analog and digital. This small project is built to cover all fundamental functions for PSoC programming - voltage regulator, RS-232 driver, LCD port, and ICP (In-Circuit Programming) port. Working area is also available for extensive circuit design. Sample application: Serial LCD controller, Digital voltmeter, Servo motor controller, and etc.

Package Contents

• PSoC1000 Board
• Manual
• 3 Month Factory Warranty

This is a mini PSoC microcontroller board from Cypress built-in powerful functions for both analog and digital. This small project is built to support MCU 24-pin I/O and integrated with many interface to expand usability - voltage regulator, RS-232/RS-485 driver, RTC, Serial EEPROM, I2C remote, LCD port and ICP (In-Circuit Programming) port which can be programmed on PSoC chip directly.

Package Contents

• PSoC1200 Board
• Manual
• 3 Month Factory Warranty

PSoC Kit V2.0 is the development board for 28-Pin PSoC microcontroller. This is a complete system for learning fundamental concepts as well as applying for real application usage. PSoC device is configurable mixed-signal arrays that integrated an 8 bit Harvard microcontroller and related peripheral circuits typically found in an embedded design. This board has many built-in interface circuits such as 7-segment display, LED, PB-Switch, DIP-Switch, 0-5 Vref, Piezo, RS-232 Dirver, I2C Device and ICP Port to support downloading programs

Package Contents

• PSoC Kit V.2.0 Board
• Manual
• CD Software
• WPP-20
• RS-232 (M-RS232) Cable
• 3 Month Factory Warranty