The EXM1A is designed for working with multipurpose hobby or small micro controller project that helps you build your circuit prototype easier with soldering pad. (or working area) This board also has built-in essential circuit that is usually used for your projects such as voltage regulator, and two channel of RS-232C line driver.

Package Contents

• EXM1A Board
• Manual
• 3 Month Factory Warranty

This module is an expansion module for interfacing with microcontroller system. Its outputs are a load controller for both AC and DC with maximum 10 Ampere. There are standard 6-pin connecting interface and IDC-10 which can be connected with other microcontrollers. Equipped with bit jumper for output selection.

Package Contents

• EXP4R24V Board
• Manual
• 3 Month Factory Warranty

This board is an interface module for microcontroller. There are four channels of digital input and four channels of relay output. The digital input circuit is installed an opto-isolator in order to protect the MCU from misusing an external signal. Acceptable voltage range for this module is between 12 and 24 VDC. For the output part, there is a SPDT relay at 5A/220VAC.

Package Contents

• EXP8IO24 Board
• Manual
• 3 Month Factory Warranty

This module is a testing tool for microcontroller system. This module supports both analog and digital signal such as digital input, digital output, pulse signal, debounce signal, piezo speaker and analog voltage reference etc. It’s convenient to use and connect to other microcontroller boards with IDC-10 connector.

Package Contents

• IOTESTER Board
• Manual
• 3 Month Factory Warranty

This module is for converting USB to Serial (TTL) signal. FT232RL chip is integrated on the board to proide much functionality - generated clock circuit and EEPROM. Signal link is designed in DIP-28 pins (600 mil) for ease of use. This converter provides two way serial communications signal conversion betweenthe TTL (Transistor Transistor Logic) output to and from a personal computer USB port using virtual serial COM port. It can be used on any Micro controller - PIC, Atmel or other which has TTL serial communications.

Package Contents

• USBFT232 Board
• USB Cable
• CD Software
• Manual
• 3 Month Factory Warranty

This module is a development board for PIC microcontroller supporting both 20-pin and 40-pin package, and both 16FXXX and 18FXXX family. The module is equipped with various interface circuits for experimenting such as LED logic monitor, PB switch, DIP switch,and etc. Interface circuits connects with a jumper for ease and flexibility. Two ports is provided for programming on a chip which are ICD port for microchip ICD2, and ISCP-10 port for our standard PIC loader.

Package Contents

• PCK1100L Module
• PIC Loader
• Manual
• CD Software
• IDC10 Cable
• RS-232 Cable
• 3 Month Factory Warranty