The EXM1A is designed for working with multipurpose hobby or small micro controller project that helps you build your circuit prototype easier with soldering pad. (or working area) This board also has built-in essential circuit that is usually used for your projects such as voltage regulator, and two channel of RS-232C line driver.

Package Contents

• EXM1A Board
• Manual
• 3 Month Factory Warranty

This module is an expansion module for interfacing with microcontroller system. Its outputs are a load controller for both AC and DC with maximum 10 Ampere. There are standard 6-pin connecting interface and IDC-10 which can be connected with other microcontrollers. Equipped with bit jumper for output selection.

Package Contents

• EXP4R24V Board
• Manual
• 3 Month Factory Warranty

This board is an interface module for microcontroller. There are four channels of digital input and four channels of relay output. The digital input circuit is installed an opto-isolator in order to protect the MCU from misusing an external signal. Acceptable voltage range for this module is between 12 and 24 VDC. For the output part, there is a SPDT relay at 5A/220VAC.

Package Contents

• EXP8IO24 Board
• Manual
• 3 Month Factory Warranty

This module is a testing tool for microcontroller system. This module supports both analog and digital signal such as digital input, digital output, pulse signal, debounce signal, piezo speaker and analog voltage reference etc. It’s convenient to use and connect to other microcontroller boards with IDC-10 connector.

Package Contents

• IOTESTER Board
• Manual
• 3 Month Factory Warranty

This module is for converting USB to Serial (TTL) signal. FT232RL chip is integrated on the board to proide much functionality - generated clock circuit and EEPROM. Signal link is designed in DIP-28 pins (600 mil) for ease of use. This converter provides two way serial communications signal conversion betweenthe TTL (Transistor Transistor Logic) output to and from a personal computer USB port using virtual serial COM port. It can be used on any Micro controller - PIC, Atmel or other which has TTL serial communications.

Package Contents

• USBFT232 Board
• USB Cable
• CD Software
• Manual
• 3 Month Factory Warranty

This development board is designed specifically for a fundamental and intermediate Atmel AVR learner. 20-pin MCU number ATTINY2313 and 40-pin MCU number ATMEGA-16/32/8535 can be installed on the board and can be programmed by ISP (In-System Programming) via computer parallel port. With ISP, the programs can be downloaded directly to MCU. The board is also equipped with many useful interface circuits which is used for your own experimenting and developing. This mainboard can also be programmed other MCUs; since the loader is set apart from the mainboard.

Package Contents

• AVRS2M16 Module
• ISP Loader
• Manual
• CD Software
• IDC10 Cable
• RS-232 Cable
• 3 Month Warranty

This development board is designed specifically for a fundamental and intermediate Atmel AVR learner. 20-pin MCU number ATTINY2313 and 40-pin MCU number ATMEGA-16/32/8535 can be installed on the board and can be programmed by ISP (In-System Programming) via computer parallel port. With ISP, the programs can be downloaded directly to MCU. The board is also equipped with many useful interface circuits which is used for your own experimenting and developing. This mainboard can also be programmed other MCUs; since the loader is set apart from the mainboard.

Package Contents

• AVRS2PM8 Module
• ISP Loader
• Manual
• CD Software
• IDC10 Cable
• RS-232 Cable
• 3 Month Warranty

This development board is designed specifically for a fundamental and intermediate Atmel AVR learner. MCU number AT90S4433 and ATMEGA-8 can be installed on the board and can be programmed by ISP (In-System Programming) via computer parallel port. With ISP, the programs can be downloaded directly to MCU. The board is also equipped with many useful interface circuits which is used for your own experimenting and developing.

Package Contents

• AVRSD1M Module
• Manual
• CD Software
• AT-ISP Cable
• RS-232 Cable
• 3 Month Warranty